ACR Electronics SmartReader Plus Bedienungsanleitung Seite 67
- Seite / 103
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
SmartReader Data Logger
59
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
second period (using the 128 pulses/sec. channel).
2. Decide which mode you want to have your SmartReader 9 count in. For more
information on the two choices you have -- Normal Rate mode and Accumulate mode --
refer to the Counting Modes and Equations section.
3. Connect the Rate Select jumpers to the correct positions for your application, and choose
the corresponding equation or write your own custom equation. Custom equations allow
you to convert raw readings from a circuit (in Hz) to the units you require (for example,
litres per second). See your TrendReader software guide for more information on custom
equations).
4. Connect your transducers or transmitters and check the operation of the logger by
viewing the Realtime readings in TrendReader software. If you can, try and exercise your
transducers (make them change their output) to ensure that everything works properly. If
it does, then you are ready to place your assembly in the field to start logging your data.
1.11.5 Rate Select Connections
The maximum number of pulses the logger can count in any eight-second period is 255, or
about 32 pulses per second. To count more than this, you need to divide the pulse rate down
to less than 32 pulses per second. This can be done by altering the Rate Select jumper
connections.
Figure 9-4: Setting the Rate Select Jumpers
For each pulse channel, the rate select terminal should connect to the 32/sec. terminal (to
count every pulse), to the 64/sec. terminal (to count every second pulse) or to the 128/sec.
terminal (to count every fourth pulse). Do not connect any external device to the 32/sec.,
64/sec., 128/sec. or rate select terminals. These connections are only for selecting internal
rate. For each channel, make sure that one of the 32, 64, or 128/sec. terminals is connected
to its own rate select terminal. If you connect more than one of these at a time for each
channel, the logger will not count pulses. If you do not connect any of these, the logger also
will not count pulses.
- IMPORTANT! 1
- SmartReader Data Loggers 2
- TRADEMARK NOTICES 3
- LIMITED WARRANTY 4
- Table of Contents 5
- 1.1.1 Features 9
- 1.1.2 Description 10
- 1.1.3 Programmed Operation 10
- 1.1.5 How to Use SmartReaders 11
- 1.1.6 Specifications 13
- 1.1.7 Approvals 14
- SmartReader Software Driver 15
- 1.2.1 Logger Status 16
- 1.2.2 Logger Channels 18
- 1.2.2.2 Channel Calibration 20
- 1.3.1 Description 21
- 1.3.2 Setup 21
- Other Applications 22
- 1.4.1 Description 23
- 1.4.2 Setup 23
- 1.4.3 Accessories 24
- 1.4.4 Troubleshooting 25
- 1.4.6 Specifications 26
- 1.5.1 Description 28
- 1.5.2 Setup and Use 29
- A60FL / A65FL 29
- A70FL / A75FL 30
- 1.5.4 Specifications 31
- 1.5.5 Troubleshooting 31
- 1.6.1 Description 32
- 1.6.2 Setup 33
- 1.6.3 Pressure Calibration 34
- 1.6.4 Specifications 35
- 1.7.1 Description 37
- 1.7.2 Setup and Use 37
- 1.7.3 Specifications 38
- 1.7.4 Calibration 39
- 1.8.1 Description 41
- 1.8.2 Setup and Use 41
- 1.8.3 Specifications 42
- 1.8.4 Calibration 43
- 1.9.1 Description 45
- 1.9.2 Setup 45
- 1.9.3 Choosing Input Channels 48
- R = 200 / Iin 52
- 1.9.7 Specifications 59
- 1.9.8 Applications 60
- 1.10.1 Description 62
- 1.10.2 Setup and Use 62
- SmartReader 9 Pulse Logger 64
- 1.11.3 Quick-Start Tutorial 65
- 1.11.7 Specifications 69
- 1.12.1 Description 70
- 1.12.2 Setup 70
- 1.12.3 Accessories 71
- 1.12.4 Troubleshooting 72
- 1.12.6 Specifications 73
- Monitoring Resistance 75
- Temperature and 77
- Relative Humidity 77
- Calibration 77
- L" reading 79
- H" reading 79
- L - 170 x bH) / 428 79
- H - bL) - 1) 79
- L - 145 x bH) / 296 81
- Thermistor Temperature 82
- 1.15.4 Setup and Use 83
- 1.15.5 Specifications 84
- SmartReader Data Logger 89
- 1.15.7 Custom Probes 92
- 1.15.10 Probe Assemblies 95
- Sample Rates 97
Verwandte Produkte und Handbücher für Navigatoren ACR Electronics SmartReader Plus
(31 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern