ACR Electronics Nauticast 2625 Installationshandbuch PDF herunterladen (Seite 46)

Installation Manual 42 Y1-03-0204 Rev.J

AIS: BATTERY SOON

LOW

Battery is soon out

of capacity

Reaction: Own ship data is lost after powering on/off the system.

Remedy: consider to contact Technical Support for additional help

AIS: PRESS ENTER TO

EXIT 1W/AUTO TX

MODE

Conditions for

enabling 1 Watt

TX power are not

valid

Reaction: Conditions for enabling 1 Watt TX power are not valid.

This means that:

• the speed is >3kn and / or

• the navigational status is NOT moored / at anchor and / or

• the ship type is NOT “Tanker”

Remedy:

• Check the conditions (SOG, Navstat, Shiptype)

if GPS is valid ( a invalid GPS causes also this alarm)

AIS: ENTER MMSI

NUMBER

No valid MMSI

entered.

Reaction: During the initial boot or after “factory settings” the user is

asked to enter a valid MMSI. As long as this is not done, the system

does not transmit.

Remedy: Enter a valid MMSI

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 74 75

Keine Kommentare

ACR Electronics Nauticast 2625 Installationshandbuch Seite 46