ACR Electronics SmartReader Plus Bedienungsanleitung PDF herunterladen (Seite 56)

TrendReader Standard 2

2005 ACR Systems Inc.

Refresh Connection will close and then re-scan the connection. This is useful if you were

initially using the port as a serial connection but now want to use an external modem.

Logger

5.5.1.1.1

A Logger node is used to access connected loggers. Once a logger is contacted, its status is

displayed. Initially, the COM Port menu actions are still shown at the top of the Work Area. If

you want to perform actions on the logger, you need to first activate the logger menu.

If you are in the Connections view, click in the logger status window in the Work Area. If you

are in the TrendReader Explorer, you can click on the logger serial number in the Shortcuts

Bar or click in the logger status window in the Work Area. The Work Area with the logger

menu is shown below.

Actions

When a Logger is selected, you can choose to Contact, Backup, Edit the Setup, or Close the

logger. You can also Maximize the Realtime display and Stop and Start Realtime, if your

logger supports Realtime, or display Help for your logger. Note that if you have a network of

loggers, the actions will be performed only on the selected logger.

Contact will re-establish a connection with the logger or connect to a new logger if the

previous one was removed.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 197 198

Keine Kommentare

ACR Electronics SmartReader Plus Bedienungsanleitung Seite 56