ACR Electronics RCL 100 Spezifikationen PDF herunterladen (Seite 12)

Y1-03-0158G 11

Remove the light from its mounting location. Lamps should be

changed in an environment that includes good lighting and protection

from the weather, i.e., in a suitable work place.

2) Remove top cover (4 top screws at sides of front, and 4 counter

sunk Phillips screws attaching top cover to lower case). Use L wrench

furnished with light (see Figure 8).

3) Carefully remove top cover by lifting straight up (see Figure 9).

4) Observe shape and position of the bulb wire loop (see Figure 10).

5) Disconnect bulb wires from terminal block and with small wire snips,

remove the cable ties from bulb wires (see Figure 11).

Figure 8

Figure 9

Figure 10

Figure 11

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

ACR Electronics RCL 100 Spezifikationen Seite 12