ACR Electronics ENGLISH Spezifikationen PDF herunterladen (Seite 8)

Y1-03-0079-1C 7

OPERATING INDICATORS

CHAN 16

The push switch includes a RED light which will be

illuminated when the radio is ON and Channel 16 is

selected.

CHAN 6

The push switch includes a GREEN light which will be

illuminated when the radio is ON and Channel 6 is

selected.

VOL ▲ ▼

Both of these push switches light up YELLOW when

the PTT switch is depressed - indicates that radio is

transmitting.

PTT

The push switch blinks YELLOW at a slow rate to

assist operator in locating the PTT switch in darkness.

CHANNEL 16 OPERATION (CHAN 16)

1. Remove control panel protective cover.

2. Strap the unit around operator's wrist, hand or glove.

3. Press ON/OFF button for one (1) second to turn ON the Survival

Radio.

4. CHAN 16 button stays lit (red).

5. Listen for the tone and for the squelch action 3 seconds after

activating the unit.

6. Press blinking PUSH TO TALK button to transmit.

7. Speak loudly and clearly into speaker area from a distance of

approximately 3"to 6" (7.5 cm to 15 cm).

8. Both Volume indicators stay lit during transmission.

9. Release PUSH TO TALK button to listen.

10. Adjust Volume by pressing the respective buttons (Note: there are 4

preset volume settings from which to choose).

11. Keep transmissions to a minimum to conserve battery power.

12. Periodically verify that the CHAN 16 button is lit (red) to guard

against accidental selection of channel 6.

13. Press ON/OFF button to turn unit off.

CHANNEL 6 OPERATION (CHAN 6)

1. Remove control panel protective cover.

2. Strap the unit around operator's wrist, hand or glove.

3. Press ON/OFF button for one (1) second to turn on the Survival

Radio.

4. CHAN 16 button stays lit (red).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

ACR Electronics ENGLISH Spezifikationen Seite 8